2007 STOCK Laminating A-14 R5PS6M/1650x2050P

- Year 2007 - Max.size: 1620 x 2050 mm - Min.size: 500 x 500 mm - Laminating station with suction belt table and sliding mark for lateral alignment - Electronically controlled leading edge unit - Automatic glue supply - Bar with stripping needle for processing cardboard carrier sheets, from approx. 400g/sqm upwards - Short set-up times, as all rollers are centrally and parallel adjustable. Due to the short set-up times, the machine is ideally suited for small and medium runs. Already after 2-3 sheets the machine is adjusted. - Lateral alignment by sliding marks (left and right) - Laminating accuracy is achievable due to the merging system. Carrier sheet: - single face corrugated board, E/B- F and G flute - Two-sided corrugated board up to 7 mm thickness - Cardboard from approx. 0.6 mm (400 gr.), upwards to approx. 2 mm thickness Cover sheet: - cardboard from 130-800 g/sqm Tolerances: approx. +/- 0.5 mm for front and side edge, depending on the sheet quality. The front edge is always edge-glued. Capacity: up to max. 2500 sheets/h with 1-(2) persons. Front edge feeder: - Pile height approx. 1800 mm - Pile weight max. 1000 kg - Pallet loading from behind Print sheet feeder: - Integrated trailing edge feeder with suction head, without non-stop. - Pile height max. approx. 350 mm - Pile weight max. 500 kg - Pre-pile height of the printed sheets: approx. 1700 mm - Pallet entry from the B-side with the help of a pre-pile table, as well as with air tables. Belt feeder: - Pre-stacking height for corrugated board up to approx. 350 mm and for cardboard up to approx. 100 mm. - For non-stop operation - with manual pre-stacking Delivery : - Pallet stacker for autom. sheet delivery - Stacking height up to approx. 1600 mm - With the option for pallet change in non-stop operation, at reduced machine speed Control : Siemens SPS control, microcontrol system